Add a new building

If you are using Integrated Accounting, you should set up your buildings only after you set your accounting. Although this is not required, it is suggested, as it will keep things in logical order.

On this page:

Table of contents

• Step 1 — Open the Building Screen
• Step 2 — Select Add New
• Step 3 — Building Name
• Step 4 — Press Next
• Step 5 — Set Building Information
• Step 6 — Save or Cancel

Step 1 — Open the Building Screen

From the Building Menu, select Edit Buildings

Step 2 — Select Add New

Select <add new...> from the first drop down box.

Step 3 — Building Name

In the edit box below <Add New...>, type in the name you would like to call your building. This is an internal name only.

Step 4 — Press Next

Press Next to advance to the Building Information screens.

Step 5 — Set Building Information

There are three subscreens for editing building information:




See these pages for more information on each of the information captured on these screens:

• Building Address (#1)
• Manager Information (#2)
• Building Defaults (#3)

Step 6 — Save or Cancel

Press Save to save the edited information and exit.
Press Cancel to cancel changes and exit.



Back to Building Management
Return to Property Management Setup

---